We all know that equipment products are the most attention to detail, because a small detail problem can bring a great impact, everyone may have heard of the butterfly effect, the truth is the same, children's play equipment manufacturers The good or bad play is also whether the internal details of the equipment are perfected. A small difference can cause major losses. Although modern technology is already very developed, we have enough funds to support the development of the industry, but the details are still developing. It is difficult to focus on success without paying attention to details.

The high profitability of children's play equipment is closely related to daily maintenance. Safe profit of amusement equipment:

1. The appearance of amusement equipment must attract people's attention. The same kind of amusement equipment, some businesses are hot, and others are arrogant. The appearance is the first element.

2, the quality of amusement equipment, which is no doubt, quality is the premise to ensure the operation, we must choose large manufacturers, product quality must be perfect.

3, the choice of motor, motor is the core of amusement equipment, motor damage is a very bad phenomenon for customers or investors, affect the customer's mood does not say, but also to bring a lot of investors Maintenance costs and operating losses.

4, electrical accessories must be qualified, electrical accessories must use the regular manufacturers of qualified products.

5, the degree of external spray paint, spray paint must be bright, fresh, light, the majority of the glass fiber reinforced plastic products on the performance of the external paint, the decoration of the equipment is also reflected in the glass steel.

In recent years, the domestic large-scale amusement industry has developed rapidly. Many cities have established large-scale amusement parks, and more and more large-scale amusement facilities are put into operation. Due to a variety of factors, various obstacles often occur during the operation of amusement facilities and cause accidents, causing casualties and property losses. Therefore, by analyzing some of the frequently occurring fault phenomena in amusement facilities, and adopting the correct treatment methods to formulate and improve preventive measures, the occurrence of various accidents can be avoided more effectively. Below, for your reference, check the mechanical failures, maintenance and repair methods common to large amusement devices during operation.

First, the chain jitter. This may be because the chain is too loose, the load is too large or one or more links are inflexible; the solution is to install the chain tensioner or adjust the center distance, possibly reducing the load.

Second, the chain plate fatigue. When the load is too large to exceed the fatigue limit of the chain plate, the chain plate will be subject to fatigue failure, resulting in micro-cracks around the hole until the fracture; the solution is to reduce the load or replace the chain with large carrying capacity.

Third, the sprocket teeth wear. If both sides of the sprocket teeth are significantly worn due to poor alignment of the transmission, if a "bent groove" is produced, it means that the sprocket should be replaced with excessive wear, or the sprocket can be reversed so that the lighter wear side faces the chain, causing excessive wear. The sprocket is best replaced with the chain.

Fourth, the pin wear. The cause of wear of the pin may be due to insufficient lubrication. Always check the oil for abrasives or change the lubrication.

Fifth, the chain and sprocket coordination is not good. If the chain and the sprocket do not cooperate well, it may be that the chain hinge is worn and the pitch is extended. If there is a phenomenon of skipping, the chain should be replaced in time. If the sprocket wears out, it must be replaced to avoid damaging the new chain.

Six, chain side grinding. If the internal surface of the inner chain link pulls the inner surface seriously, it indicates that the drive is not aligned. The solution is to check the alignment of the shaft and the sprocket. If there is no problem in the installation, it can be observed whether the rigidity is caused by the excessive load deformation during the operation. insufficient.

Seven, pin shaft glued. Pin gluing is generally caused by insufficient oil supply. If only one end is glued, check the installation of the shaft and sprocket, whether the shafts are parallel, whether the sprocket is coplanar, and whether the shaft and the sprocket rotate during operation.

Eight, the chain tension is not normal. The tension of the chain is related to the sag distance of the loose edge of the chain. For horizontal and tilting transmissions with adjustable center distance, the sag of the loose edge of the chain should be about 2% of the center distance. The center line should be driven vertically or subjected to vibration. The reverse transmission should be Make the chain more tight.

Nine, the chain running noise is too large. This may be due to a non-coplanar sprocket, too loose or too loose a chain, insufficient lubrication, wear of the chain and sprocket, or an excessively large chain pitch. When such a problem is encountered, the front and rear shafts should be checked for parallelism and sprocket coplanarity to be corrected, and the center distance and the tensioning device should be adjusted so that the proper tightness can be obtained and lubrication can be ensured to the workpiece.

10. The front and rear axles are not parallel and the sprocket has poor coplanarity. For the wear life, the performance of the chain depends to a large extent on the correct installation of the front and rear axles and sprockets. The requirements are: the parallelism of the front and rear axles is within 1/300, and the coplanarity of the front and rear wheels is between 0.5 and 1.0 mm/m. If the chain is found during operation, the above problems should be adjusted in time.

In our real life, we pay attention to the details to make things more perfect. Attention to details of life will be more real and meaningful. Without ignoring the details, it will affect economic development and even cause major accidents. The development of children's amusement equipment manufacturers is also the same, no details of the support from where to talk about success? How can you play smoothly?


Wine Goblets & Wine Bottle Rack

The red wine shelf is the shelf for placing red wine, which is used for safety, use and beauty.
There are many kinds of wine racks, and the appearance is countless: small - -- can place a single bottle of red wine is generally: iron, stainless steel, copper, chrome!
Larger ones include: red wine mini bar, which can hold two to three bottles of red wine, and can hold red wine cups! Red wine bottle opener and other red wine appliances!
Larger ones: wine cabinet
There are many types and shapes of wine racks, and the specific sizes are different. However, the specifications of red wine bottles are relatively simple. The bottom diameters are generally 8CM and 9CM, and the height is 30 cm. General wine racks are universal. So is the bar counter!
1. The red wine purchased by ordinary families cannot be drunk at one time. During storage, the wine should be kept in contact with the cork, and the cork should be kept wet when it comes in contact with the liquor. It is also possible to tilt it at a small angle, which allows the cork to contact the liquor and the red wine residue to settle at the bottom. If the bottle stopper is dry, it will shrink and leak, which will lead to bad taste of red wine, so it should be laid horizontally.
2. The original design of the red wine rack is just to facilitate people to better store red wine when they can't drink it all at once. However, as the design continues to update, gradually the red wine rack is also the same as red wine, implying a taste, and various kinds of strange red wine racks emerge in endlessly! It seems to be out of tune with this taste. Maybe life is more interesting.

Wine Goblets & Wine Bottle Rack,Wine Glass Rack Holder,Wine Rack Countertop,Wine Rack Shelf

OYEAL Global , https://www.oyealfurniture.com

May 22, 2023