In the field of office equipment, especially printer products, it is the most frequently used and most accessible consumer output device for daily work. Under the premise of advocating "energy saving and emission reduction" all over the world, how to effectively reduce office costs and reduce energy consumption has become a topic of concern to office workers. The author found in the investigation and interview that although there is a desire to save energy, since most office families are not familiar with the performance of printer equipment, "how to print to be more energy-efficient" is a new problem that hinders office energy saving in daily work. After summarizing the experience of many office workers, the author believes that printing energy saving should focus on the big and the small. Next, I will take OKI C711dn, a new mainstream color LED printer for business printing as an example, to introduce you to the successful experience of energy-saving printing. Save on consumables Consumables are the main source of consumption of printer equipment, so the energy saving of the printer must be discussed from the use of consumables. As far as the current printing needs of enterprises are concerned, most of the output is required for daily office work. When printing these informal documents, the standard printing mode can be changed to the ink-saving printing mode. The specific method is to open the printer's "Properties" dialog box before performing printing, click "Printer Preferences", there is a "Mode Selection" window, where we can open the "Toner Save Mode", so that the printer will Print in ink-saving mode. It is reported that C711dn can not only save the use of toner with this method, but also increase the printing speed and save electricity. The printed manuscript is more than enough for daily proofreading or circulation. At the same time, as a new mainstream LED printer for business printing, C711dn is equipped with an LCD display to monitor the consumable capacity in real time. When the LCD screen prompts "Toner Remaining Low", or if the print becomes lighter, according to the experience accumulated by evaluation engineers for a long time, you can open the top cover of the printer and tap the toner cartridge several times to make the toner Evenly distributed. This allows the printer's toner cartridge to provide the maximum print volume. To avoid wasting toner and possible toner sensor errors, users can wait until the LCD display shows "Toner is gone" before replacing the toner cartridge. In addition to toner, the photosensitive drum is another major consumable for printers. C711dn uses a drum powder separation design, the photosensitive drum can be replaced as a separate consumable, and in the process of using the photosensitive drum, special attention should be paid to avoid unnecessary waste. The surface of the photosensitive drum is easily damaged and is extremely sensitive to light. In addition to not touching to prevent scratches, do not expose the photosensitive drum to normal room light for more than 5 minutes, or directly expose the photosensitive drum to daylight and very bright indoor lights. Pizza Knife,Pizza Cutter,Pizza Slice,Bike Pizza Cutter V-Boom's Industrial Co.Ltd , https://www.v-booms.com
August 20, 2020