Speed-heating electric water heater consumes electricity?

The characteristics of the quick-heat electric water heater are: that it is hot immediately, without waiting, and heating can usually be started within a few seconds. Such high efficiency will cause many people to worry. Will the heating speed be so fast? Will today bring the power consumption of the quick-heat electric water heater and the use of the quick-heat electric water heater? Related content, I hope to let you know more about the quick-heat electric water heater.

Does the quick-heat electric water heater consume electricity?

The instant electric water heater is a water heater that uses electricity to heat. The main heat inside is a heating body with relatively high thermal conductivity, which is converted into heat by electricity, and heat is transferred to the water in high power. In a state of just a few seconds, the powerful heat can make the incoming water rise rapidly.

1. The hot electric water heater does not need to be preheated in advance, so the heat energy is not lost when it is preheated. When it is not used, it is turned off when it is not used. How much water is used when it is used, and there is no unused water in the storage water heater. The energy consumption of the remaining hot water is truly energy-saving, water-saving and water-saving. In general, instant electric water heaters save 15%-30% of electricity compared to conventional electric water heaters.

2. The instant electric water heater does not need to be preheated for a long time, and does not need to be heated and kept at any time to save energy;

3. The instant electric water heater is a water control machine, that is, the water is turned on, and the water is turned off, which will not cause heat loss and waste electrical energy;

Quick-heat electric water heater tips

1, through the water. Pay attention to the first use, first open the hot water valve or hot water tap of the cold water regulating valve to discharge the air when filling. Then open the tap water valve to the water heater, fill the water heater, do not drive too much to produce a big impact. When the hot water tap or the sprinkler has water flowing out, the water heater has been filled with water, and the hot water outlet valve is closed.

2, power on. After checking the water supply is normal, set the required water temperature, then plug the power plug into the outlet and turn on the power.

3. Heating. After turning on the circuit, turn on the water heater's power switch, the heating light is on, indicating normal, and heating begins. The heating lamp is extinguished, the heat preservation lamp is on, indicating that the heating is stopped, and the water temperature can be used as required.

4, hot water is used. For suitability, the mixing water temperature can be adjusted, ie the flow of hot and cold water is adjusted.

When adjusting the water temperature, try to test the temperature by hand, do not directly rush on the body to avoid burns. The enclosed water heater allows continuous operation, automatic temperature control, and the home can be selected as needed. If not needed, the temperature control is not easy to adjust too high to save energy and extend the life of the water heater.

The above is the introduction of the heat consumption of the quick-heating electric water heater and the use of the quick-heating electric water heater. I did not expect that an electric water heater that is heated so fast actually saves electricity. I believe that you must be on the heat. The water heater is heart-warming? It is not only efficient, energy-saving and environmentally friendly, but also much smaller than the average electric water heater. It can also meet your visual requirements. Don't hesitate to have families in need!