Shanghai Haozhuang Instrument Co., Ltd. develops the LNB brand anaerobic incubator, which is energy-saving and environmentally friendly, leading the country. Professional manufacturing is more secure and affordable. Shanghai Haozhuang Instrument Co., Ltd. is a variety of biochemical, light incubator, shaking incubator, constant temperature incubator, mold incubator, hot and cold cycler, shaker, oscillator, stirrer, water bath, centrifuge, electric heating Professional manufacturing enterprise. The company integrates the research, development, production and sales of high-tech experimental instruments. Its products have eight series and more than one hundred varieties. The operations inside the incubator and the movement of items into and out of the incubator: the movement of samples and equipment into and out of the incubator and the operator's hands are all done through the porthole. The pallet can hold 10 90mm slabs, and there is one pallet for each porthole. Enter the operation procedure: a. The sleeve should be placed on the flange of the porthole and fixed by an “O†ring; b. Put the sample or equipment on the shelf of the outer door and lock the outer door; c. Remove the watch, ring, bracelet Or other jewelry that may scratch the sleeve; d. Put the sleeve on the forearm (talcum powder can be used); e. Use the foot switch to evacuate the sleeve and then use "Gas" to inflate, this operation is repeated at least once ; f. Release the inner door lock; g. Fully open the inner door until the inner door is attracted by the magnet on the inner wall of the incubator; h. Now the operator can operate inside the incubator. Exit the operating procedure: put the sample / equipment to be taken out on the shelf and close the inner door. Cultivation: The interior of the incubator is divided into two layers by shelves. It is recommended to: a. Place the plates on the plate rack; b. Do not stack more than 10 plates; c. If using pre-inverted plates, ensure that they are freshly prepared; It takes more than 72 hours to incubate. It is recommended to use a bag with an open top or a suitable container to prevent drying; e. Do not stack more than 6 plates on the front edge of the shelf. Note: The operating actions in the incubator should be as gentle as possible, especially when entering and exiting. If the action is large, it will cause the air pressure in the box to change and waste gas.
Rubber Blanket rejuvenator Features:
·Has instant recovery effect for the pressed concave of blanket.
·It can quickly remove the glass hardened surface and ink stains on the blanket.
·Restore the original elasticity of blanket,extend the service life of blanket,and non-combustibility.
Rubber Blanket rejuvenator Usage: Pour over in dry cloth and wash blanket manually
Washing Blankets,Blanket Cleaning Solution,Blanket Cleaning,Blanket Wash Solvent Shanghai Chenjie Printing Material Co., LTD , https://www.shprintbar.com
March 17, 2021