At present, there are many varieties of mahogany furniture on the market, and the advantages and disadvantages are different. People should pay attention to the brand when purchasing, and choose according to their living conditions, paying attention to its practicality and artistry. In addition, try not to buy those pieces of wood that are too thick and are pieced together with one or two or three pieces of material. Because the wood is too thick, if it is not dry enough, it will easily crack and become cracked in the future. Also, do not buy furniture that is too large or too wide, because the wider the surface, the greater the shrinkage, and it is easy to make the wide panel unevenness affect the appearance. The daily maintenance of mahogany furniture is also a matter of learning. In daily use, you should try to avoid the hard objects rubbing against the furniture. When handling, you should take it lightly and do not slam it with walnut oil. It is best not to place the furniture in direct sunlight, and apply sunshade to the sunny doors and windows. When conditions permit, move the furniture once every six months to reduce the amount of sunlight that the furniture has been in the same position for a long period of time. On both sides of the furniture, use a clean soft cloth dampened with walnut oil to remove dust. Wipe the glaze with walnut oil. It is best to mop the floor with a wet mop and place a lot of bonsai, flowers and fish tanks inside the room to increase the moisture in the room. If the air conditioner is used indoors, put a warm towel on the air outlet or air sheet to increase the humidity of the air. It is best to install the warmer under certain conditions. PP plastic, also known as polypropylene plastic, is another fine resin varieties, following the development of nylon, which is a semi-crystalline materials, the advantage is obvious, with excellent mechanical properties and heat resistance, with a high not hydrophilic sex, almost non-absorbent. The disadvantage is poor low temperature impact resistance, easier to aging. However, for comparison PE plastic having a higher melting point.
PE plastic is polyethylene plastic, its corrosion resistance and electrical insulation are very strong. Rigid hardness and strength are relatively high, and the same PP plastic, it also very small water absorption.
Polycarbonate (referred PC) is a polymer molecular chain containing a carbonate group, an ester group according to the structure can be divided into aliphatic, aromatic, aliphatic - aromatic and other types. Which due to the aliphatic and aliphatic - aromatic polycarbonate lower mechanical properties, thereby limiting its application in engineering terms. Currently, only the aromatic polycarbonate obtained industrial production. Due to the special nature of the polycarbonate structure, it has now become the top five fastest growing engineering plastics in general engineering plastics.
Stackable Plastic Chairs, Plastic Leisure Chair, White Plastic Chair, Plastic Dining Chairs Taizhou Pinsum Furniture Co.,Ltd , http://www.pinsumchina.com
February 14, 2020