[ Chinese wardrobe network ] In the south, the temperature in the south is high, and in the south it is rainy. The air is filled with water vapor and moisture. The first problem facing the maintenance of solid wood wardrobes is dehumidification. Waxing is a more common method. The following China Wardrobe Network tells everyone to properly wax the wood wardrobe. 1, in winter, locking in moisture and waxing in time is the key In winter, the indoor heating temperature is higher, the air humidity is lower, and it is easy to cause the solid wood wardrobe to crack and open. In the winter, the solid wood wardrobe should be waxed regularly. Waxing not only can more effectively lock the moisture of the solid wood wardrobe, but also make the wardrobe look more shiny, the surface is not easy to vacuum, and it is easier to clean. 2, it is recommended to wax the solid wood wardrobe once a quarter Waxing has many advantages for solid wood wardrobes. To make solid wood wardrobes durable, they should be waxed regularly. Under normal circumstances, only one wax can be used every quarter. Although waxing is not harmful to the wardrobe, it is recommended not to wax frequently. Excessive waxing will also damage the appearance of the wardrobe coating. 3, solid wood wardrobe waxing process method The waxing process of the solid wood wardrobe 1: material preparation, ready for the special wardrobe wax, the quality of the wax is very important, it is recommended not to choose the silicone containing polish when purchasing, because silicone will not only soften the surface of the solid wood wardrobe, but also Will block the pores of the wood. The waxing process of the solid wood wardrobe 2: Before waxing the solid wood wardrobe, apply the milder non-alkaline soapy water to wipe out the old wax on the wardrobe, and pay attention to the moisture on the surface of the solid wood wardrobe. In addition, it should be done after the dust on the surface of the wardrobe is completely clear, otherwise wax spots will form or scratches will occur. The waxing process of the solid wood wardrobe 3: Apply the wardrobe wax to a clean cotton cloth, the dosage is not too large. This is done without first wasting waste, and the second is to spread the wax evenly onto the closet. The waxing process of the solid wood wardrobe 4: waxing the cotton cloth with the wax in the direction of the texture of the wood, which can cause minimal damage to the solid wood wardrobe and prolong the service life. When waxing, it is necessary to master the principle of shallow to deep, from point to surface, step by step, and evenly wax. The waxing process of the solid wood wardrobe 5: Avoid excessive friction during the waxing process, excessive friction will damage the surface of the wardrobe, and it is difficult to repair the solid wood wardrobe. Soup Plate ,Soup Plate Bowl,Bowl Soup Plate,White Soup Plates Guangzhou Concept Home Ltd , https://www.concepthomelimited.com
September 28, 2022