Packaging Fracturing Machine Maintenance Procedures

You can start with the following six steps:

1 、Oil: Regularly apply lubricant to the transmission components ( such as bearings ) of the automatic rupture tester on a monthly basis ( use common lubricants )

2. Cleaning: Keep the machine table clean at any time. Wipe the machine table with cotton cloth before and after each use to keep it clean.

3. Anti-rust: Spray anti-rust oil on the surface of the machine once a week ( clean after 2 hours of spraying )

4. Periodically open the motor cover every six months to inspect the belt for wear or looseness. Adjust or replace it as appropriate.

5. Regularly check whether the gear oil of the reducer needs to be filled or replaced every year.

6 , glycerol should be completely replaced every year.

Dongguan Haida equipment specializing in the production of carton compression testing machine , burst strength testing machine, drop test bench , vibration testing machine and other packaging testing equipment, welcome to call!