What are the characteristics of the air shower room of the automobile painting production line? The air shower room used in the automobile painting production line has basically the same overall structure principle as the air shower room used in ordinary places. Except for some details, why do you say this? It is actually very simple to think about it. The wind used in the painting line is simple. The requirements for dust removal in the shower room are relatively higher. After all, if a car does not spray paint in one place, the loss will not only be the price of a wind shower room. Here you can also refer to the previous article. Air showers are used in automotive paint shops. 1. Overview: The air shower is a clean room and a clean room. It is used to blow off the dust attached to the surface of the human body and the carrying items entering the purification plant. At the same time, the air shower also acts as an air lock to prevent Purified air enters the clean area and is an effective device for purifying the human body and preventing the clean air from contaminating the outside air. Structure: The series of air shower chambers are equipped with foam insulation color wall panels and aluminum alloy components. They are equipped with centrifugal fan and primary effect and high efficiency air filter. They are beautiful in appearance, compact in structure, convenient in maintenance and easy to operate. Features. 2. Principle: The air in the air shower chamber enters the static pressure box by the action of the fan through the primary filter. After filtering by the high efficiency air filter, the clean air is ejected from the nozzle of the air shower chamber at high speed, and the nozzle angle can be adjusted, which can be effective. The dust that is attached to the surface of the person or the carrying item is blown off, and the dust blown down is recycled into the primary effect air filter, so that the circulation can achieve the purpose of the air shower. 3. Use and characteristics: The air shower is a personal purification device used by the operator when entering the clean room. It uses a high-speed clean air to blow off the dirt entering the indoor personnel. The nozzle can be adjusted to effectively remove the person. Dust and prevent outside pollution from entering the clean area. It can also be used for blowing large cargo. 4. Equipment composition: It is mainly composed of chamber body, lighting, filtration system, fan unit, mouthpiece, and electronic control. (1), chamber body: the wall plate is made of color steel insulation board, the inner and outer plates are all color steel plates, filled with 60mm thick polystyrene material in the middle, PU foam is continuously formed; the inner and outer plates are integrally pressed with the heat preservation material. The size of the entrance and exit of the personnel is (width × height) mm: 700 × 1800. (2) Indoor lighting: The lighting is installed on the top of the chamber body. The lamp adopts Philips high-efficiency light source, which is safe, energy-saving and easy to maintain. The ballast adopts special ballast in the spray booth to ensure the light intensity ≥500Lx. (3), send and exhaust system: a. The arrangement for sending and exhausting air adopts one set of blower sets, one blower is configured, and the fan adopts centrifugal fan. A set of exhaust fan sets is used for exhausting the chamber body. b. Universal mouthpiece: The indoor air is blown to different corners of the operator by a universal mouthpiece placed on the top and side of the chamber body to ensure clean quality. c. Control system: The imported control or joint venture components make the whole control system have higher reliability. SW-CJ-1C Double Single Side Purification Workbench The horizontal one-way manifold purification workbench is a versatile local purification equipment, which is widely used in electronics, national defense, precision instruments, instruments, pharmaceuticals and Other industries. Characteristics 1, horizontal popular, quasi-closed glass damper, easy to operate. 2, using remote control switch fast two-speed control fan system to ensure that the wind speed in the work area is in an ideal state 3, using ultra-thin aluminum frame without partition high-efficiency air filter, the size of the static pressure box is reduced to a minimum, reducing the size of the cabinet shell, increasing the area of ​​the clean area African Velvet,Middle East Polyester Fabric,Middle East Style Velvet Fabric,Velvet Fabrics Printing SHAOXING RICH HOPE TEXTILE CO.,LTD. , https://www.richhopetextile.com
May 13, 2021