Case review: "My family's floor is solid wood. It has been installed for almost a year. Some people on the floor will squeak as soon as they walk up, especially at night, which affects the rest of the family." Recently, the reporter received a call from Mr. Sun. This help call came. Direct hit on the spot: The reporter led the paving expert of the Golden Eagle Eiger floor, Master Yan and Master Meng, to come to Mr. Sun's home. Mr. Sun took the reporter to the room where the floor sounded louder. Although the floor was covered with protective pads, the reporter stepped on it and found that, as Mr. Sun described on the phone, the floor produced “squeaky and squeakyâ€. The sound of the sound. Mr. Sun also specially brought a few pieces of the remaining floor. The two masters carefully determined that the material of the floor was indeed balsamic, and the quality was good. "Since the quality is no problem, why does the floor ring?" Mr. Sun asked inexplicably. Master Meng and Master Yan squatted on the floor, tapping the floor gently, and tried to lift the floor. It turned out that many of the floors were not fixed, they could be easily moved, and many of the gaps between the floor and the floor were large. Exceeded the national requirements of 0.5 mm. Expert analysis: Master Meng judged that the reason for the floor noise was not the quality of the floor itself, but the result of the workmanship and illegal operation of the paving workers during the construction. "After our preliminary judgment, many floors were not fixed with nails, nails were not enough, and it is estimated that one-third to half of the floors were not nailed," said Master Meng. Because the expansion coefficient of solid wood is relatively large, it is prone to loosening, so each solid wood floor must be fixed with nails, plus the floor of Mr. Sun's house or the parquet floor, which requires reinforcement with nails. Master Yan told the reporter: "At the time of construction, the workers should be to save trouble or save costs, and the floor is just nailed." Expert advice: "If you want to completely eradicate the problem, you can only remove the floor and re-inject the nails and reinforce it." Master Yan suggested Mr. Sun. In addition, he added: "Because these floors are straight floor, there is no lock. Therefore, it is best to make a nail at the same time as the nail, so that it can be guaranteed to be foolproof.†Master Meng said that after the floor was dismantled, it is recommended that Mr. Sun check the condition of the keel again to see if the keel is flat and there is no looseness. The situation arises. If the surface of the keel is not leveled or the reinforcement is not strong, it will also cause the floor to sound. When Mr. Sun asked if he could solve the problem without removing the floor, Master Meng believed that it is difficult to cure this "disease" without removing the floor, because the number of plates in the parquet floor is large, if nailing directly on the floor surface, This will greatly affect the aesthetics and use, so this method is not recommended. For cooking the Stainless Steel Turner can be used and it keeps the cook tension free from dreaded flaking during the time of the cooking. The stainless steel turner nonstick there is no chance of rust and corrosion and the cooked food will be healthy. And the stainless steel can prevents food from sticking. Stainless Steel Turner Stainless Steel Turner,Household Stainless Steel Turner,Stainless Steel Frying Turner,Stainless Steel Slotted Turner Yangjiang Superwins Trade Co., Ltd. , https://www.superwins-kitchenware.com
August 15, 2019