Bag Cutting Machine,Glass Coil Pouch Machine,Glass Wool Cutting Machine,Glass Wool Pouch Machine Wuxi Zhengyu Technology Development Co.,Ltd. , https://www.zhengyumachine.com
The method of using the accelerated sander is as follows:
1. The machine body should be installed on a firm and stable cement concrete foundation and fixed with foot bolts. After installation, the horizontal position should be corrected with a common level, and then the nut should be tightened;
2. After installation, install the test piece on the road wheel, connect the 380V power supply, press the power switch on the circuit board of the body, press the start button, turn the load adjustment handwheel, and let the rubber wheel slowly press the road wheel to check the road. Whether the wheel is running normally;
3. Adjust the coarse and fine sand speed control knob to check whether the feeding and feeding are stable and whether there is abnormal noise. Then, the coarse and fine sands are respectively loaded into the hopper, and the amount of coarse sand and fine sand is determined by the speed adjusting knob. After the adjustment, the position can be determined, and the next test does not need to be adjusted again. At the end of the check, press the panel stop button.
October 08, 2020